Lamellow T24 Installation – Ceiling
The installation gives the acoustic classification A with 200 mm air void, no insulation needed.
GLOBAL
TYPE / SOLUTION
Linear Panels
APPLICATION
Ceilings
INSTALLATION
CAPAX SYSTEM
Linear Lamellow-T24 installation – ceiling | a fully demountable linear panel ceiling
The Capax installation system for Lamellow-T24 is a user-friendly aluminium grid, offering installation reliability and a perfect visual result. No tools are needed to assemble the interlocking components. The Linear Panels will be fully demountable, ideal when access to the ancillary systems is required.
Step by step using 600 mm wide Lamellow panels
STEP 1
1. Suspend the ceiling hangers from the ceiling. Plan the positioning of the Nonius hangers according to steps 3 and 4.
STEP 2
2. Use the adapter 4001 to connect the T24 profiles (Capax 3261) to the ceiling hangers.
STEP 3
3. Suspend the 3261 profiles with a repeated interval of A=600 mm.
STEP 4
4. Measured along the length of the Capax 3261, the connection to the ceiling must be made every B=600 mm.
STEP 5
5. Level the height using a laser and secure with the locking pin.
STEP 6
6. When needed, connect the Capax 3261 in-line with profile Capax 3263.
STEP 7
7. Snap the distance profile Capax 3262 perpendicular to Capax 3261 every 1200 mm. Secure with self-drilling screws in the intersection points.
STEP 8
8. Two distance profiles Capax 3262 will partially run parallel, where mounted on the same Capax 3261.
STEP 9
9. Enter the Lamellow Panels into the T24 grid.
Nonius Hanger
Available in lengths 200 mm-2000 mm
Nonius 4001
BASE T-24
Baseprofile T-24. Lenght: 3100 mm
3263
3263 Connector. Length 300 mm
3262
Distance profile, with cuts every 50 mm. Lenght: 3120 mm
Locking pin
To secure the Nonius-CD position.
Products with this installation method
LAMELLOW+ BARCODE
LAMELLOW+ LINEAR
LAMELLOW SPA
A. Nonius hanger
B. Nonius bottom
C. Nonius locking pin
D. Capax 3262
E. BASE-T24
F. Lamellow-T24
G. Capax 3263 connector
Lamellow+
Wood
Wood is a natural product and each veneer is unique. Colour, pattern and structural differences are considered as normal and a part of the décor. Select panels on colour shade and plan your ceiling installation. Wood changes over time when exposed to UV-light.
Cleaning
Cleaning is performed with a dry mop or vacuum cleaner. On grease, fruit, wine and coffee stains, use synthetic detergent without ammonia. Blood stains are removed using cold water.
Storage & Transportation
· Do not transport unsecured panels.
· Do not stack pallets.
· Keep the packaging closed during storage.
· Lift panels flat, vertically and one at the time.
· Avoid exposure to strong and direct sunlight.
Conditions for Storage, Installation and Use Lamellow+
Lamellow+ is only for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C° and 25-60% air humidity. The humidity in the under laying construc-tion (concrete) should not be higher than 15%. Lamellow+ is sensitive to humidity and water, therefore they should always be stored dry and in-door.
On building site
– Avoid exposure to strong and direct sunlight.
– Do not slide products on each other. Lean panels against a wall for short term storage.
– Do not expose visible surfaces to sharp objects during installation.
– Protect both non-installed and installed Planks from impact coming from ladders, trolleys, furniture installation, etc, including all other workers and their tools.
Storage & Transportation
· Do not transport unsecured panels.
· Do not stack pallets.
· Keep the packaging closed during storage.
· Lift panels flat, vertically and one at the time.
· Avoid exposure to strong and direct sunlight.
Lamellow SPA
Wood
Wood is a natural product and each wood veneer is unique.
Variation in colour, pattern and texture is a natural part of the look. Wood changes over time when exposed to light.
Storage conditions
The panels should be stored horizontally before installation.
Avoid direct sunlight.
Cleaning
Cleaning is performed with a dry mop or vacuum cleaner. On other stains, use a synthetic detergent without ammonia and sponge with fresh water afterwards.
Humidity
Can be installed in humid environments, but Lamellow Spa is not for use in environments where the product is exposed to prolonged direct contact with water, such as in shower cabins or the like. Installation must always be ventilated with at least 5 mm distance, to other surface layers.
Conditions fort storage, use and installation
– From -40 to 100 C ° and up to 100% relative humidity.
– Avoid exposure to strong and direct sunlight.
Storage & Transportation
– Do not transport unsecured panels.
– Do not stack pallets.
– Keep the packaging closed during storage.
– Lift panels flat, vertically and one at the time.
– Avoid exposure to strong and direct sunlight.