Installation Module – Wall
Linear Modules for walls come fully assembled and standard equipped with an acoustic felt.
GLOBAL
TYPE / SOLUTION
Linear Panels
APPLICATION
Wall
Linear Module installation – wall | fully demountable
The Linear Panels are hung from hook shaped battens and once in place secured by a screw. The screw will be hidden behind the acoustic felt, using an overlap principle for a stylish and concealed result.
Step by step using 600 mm wide Linear Modules.
STEP 1
1. Attach the hook shaped battens horizontal to the wall with the help of a laser-level. Support each Linear Module with a minimum of 2 battens. The position of the battens is set by the design and dimensions of the Linear Module.
STEP 2
2. Optionally, add insulation to the back of the Linear Modul, filling the voids between the hook battens.
STEP 3
3. Secure with minimum two screws. The screws should be placed underneath the acoustic felt.
STEP 4
4. Add the next Linear Module by overlaying the previous Module 5 mm.
TECHNICAL DRAWING
A. Module ribs
B. Module bracket
C. Module Wall bracket
D. Screw for Wall bracket
E. Acoustex Insulation
Wood
Wood is a natural product and tree is unique. Colour, pattern and structural differences are considered as normal and a part of the décor. Wood changes over time when exposed to UV-light.
Conditions for Storage, Installation and Use
Only for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C° and 25-60% air humidity. The humidity in the under laying construc-tion (concrete) should not be higher than 15%. Gustafs solutions are sensitive to humidity and water, therefore they should always be stored dry and in-door.
Storage & Transportation
– Do not transport unsecured panels.
– Do not stack pallets.
– Keep the packaging closed during storage.
– Lift panels flat, vertically and one at the time.
– Avoid exposure to strong and direct sunlight.
Cleaning
Cleanings is done by dry mop or vacuum. Use synthetic cleaning fluid without ammonia for greasy stains, fruit, wine and coffee.
Our UV coated surfaces are approved for hospital cleaning products containing up to 70% alcohol.
On building site
– Avoid exposure to strong and direct sunlight.
– Do not expose visible surfaces to sharp objects during installation.
– Do not slide products on each other. Lean panels against a wall for short term storage.
– Lean panels against a wall for short term storage.
– Protect both non-installed and installed panels and ribs from impact coming from ladders, trolleys, furniture installation, etc, including all other workers and their tools.
Storage & Transportation
– Do not transport unsecured panels.
– Do not stack pallets.
– Keep the packaging closed during storage.
– Lift panels flat, vertically and one at the time.
– Avoid exposure to strong and direct sunlight.