Module-T24 – Ceiling
The Capax installation system for Linear Module-T24 is a user-friendly aluminium grid, offering installation reliability and a perfect visual result.
GLOBAL
TYPE / SOLUTION
Linear Panels
APPLICATION
Ceilings
INSTALLATION
CAPAX SYSTEM
Linear Module-T24 installation – ceiling | a fully demountable linear panel ceiling.
Gustafs Capax T24 Ceiling Grid have a semi concealed and fully demountable installation system! The stability and sturdiness in our Capax T24 Ceiling Grid provide the unique combination of real demountability and a high level of bearing safety and safety during the mounting and demounting process. No tools are needed to assemble the interlocking components. The Linear Panels will be fully demountable, ideal when access to the ancillary systems is required.
Step by step using 600 mm wide Linear Panels
STEP 1
1. Suspend the ceiling hangers from the ceiling. Plan the positioning of the Nonius hangers according to steps 3 and 4.
STEP 2
2. Use the adapter 4001 to connect the T24 profiles (Capax 3261) to the ceiling hangers.
STEP 3
3. Suspend the 3261 profiles with a repeated interval of A=600 mm.
STEP 4
4. Measured along the length of the Capax 3261, the connection to the ceiling must be made every B=600 mm.
STEP 5
5. Level the height using a laser and secure with the locking pin.
STEP 6
6. When needed, connect the Capax 3261 in-line with profile Capax 3263.
STEP 7
7. Snap the distance profile Capax 3262 perpendicular to Capax 3261 every 1200 mm. Secure with self-drilling screw in the intersection points.
STEP 8
8. Two distance profiles Capax 3262 will partially run parallel, where mounted on the same Capax 3261.
STEP 9
9. Enter the Linear Panels into the T24 grid. Add insulation to the back of the panels if required.
STEP 10
10. In-line, there will be a 5 mm open joint between the ribs.
Installation components Module ceiling T-24
Nonius Hanger
Available in lengths 200 mm-2000 mm
Nonius (4001)
BASE T-24
Baseprofile T-24. Lenght: 3100 mm
Capax 3263
3263 Connector. Length 300 mm
Capax 3262
Distance profile, with cuts every 50 mm. Lenght: 3120 mm
Locking pin
To secure the Nonius-CD position.
Technical drawings Module ceiling T24
CLOSE UP T24
A. Nonius hanger
B. Nonius bottom
C. Nonius locking pin
D. Capax 3262
E. BASE-T24
F. Module-T24
Wood
Wood is a natural product. Colour, pattern and structural differences are considered as normal and a part of the décor. Wood changes over time when exposed to UV-light.
Conditions for Storage, Installation and Use
Only for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C° and 25-60% air humidity. The humidity in the under laying construc-tion (concrete) should not be higher than 15%. Gustafs solutions are sensitive to humidity and water, therefore they should always be stored dry and in-door.
Storage & Transportation
– Do not transport unsecured panels.
– Do not stack pallets.
– Keep the packaging closed during storage.
– Lift panels flat, vertically and one at the time.
– Avoid exposure to strong and direct sunlight.
Cleaning
Cleanings is done by dry mop or vacuum. Use synthetic cleaning fluid without ammonia for greasy stains, fruit, wine and coffee.
Our UV coated surfaces are approved for hospital cleaning products containing up to 70% alcohol.
On building site
– Avoid exposure to strong and direct sunlight.
– Do not expose visible surfaces to sharp objects during installation.
– Do not slide products on each other. Lean panels against a wall for short term storage.
– Lean panels against a wall for short term storage.
– Protect both non-installed and installed panels and ribs from impact coming from ladders, trolleys, furniture installation, etc, including all other workers and their tools.