Gustafs / Linears / Lamellow Spa Linear

Lamellow Spa Linear

ACOUSTIC PANELS FOR WET ROOMS AND OUTDOOR UNDER SOFFITS

Improve acoustics and get architectural design in your spa, bathroom, or winter garden. A stable felt backing and linear ribs with real wood veneer selected from the finest materials. The Panels are maintenance free, and the natural wood gives a warm impression and multiple design options. Simple and quick installation with screws, nails, or glue. The panels are placed with imbricated, hidden joints in between. Add Gustafs matching framing lists for a perfect end finish.

TYPE / SOLUTION

Linear Panels

APPLICATION

Ceilings, Wall, Wet rooms, Outdoor

Acoustic class

A, D

CONTACT

Material

The ribs are made of a high-density composite core and the felt backing is a stable and high quality rPET. Both materials are from stable, effectively resist moisture up to 100% relative humidity and withstand large temperature variations from -40 ° C to + 100 ° C.

High tech surface

The real wood veneer is treated with a synthetic resin and an outer PVDF film that protects against moisture and temperature changes. The PVDF film also protects against the accumulation of organic growth and dirt from air pollutions and makes the surface maintenance-free.

For wet rooms and outdoor

With a ventilated installation, Lamellow Spa can be used on walls or ceilings, in wet rooms or outside under roofs. The panels are approved for direct water splashes.

FOR TOUGH CONDITIONS +

FOR TOUGH CONDITIONS

Although using a real wood veneer, the panel is approved for 100% air humidity, 100°C and direct water splashes.

EASY INSTALLATION +

EASY INSTALLATION

Lamellow Spa is a Linear solution installed as a panel, quick and simple.

OUTDOOR INSTALLATION +

OUTDOOR INSTALLATION

Lamellow Spa can be installed outdoor under roof and is maintenance free.

Veneer and felt combinations

Available with Bamboo or Artisan Oak veneer and three vibrant shades of grey for the acoustic felt, all with a lovely natural wool appearance.

Technically improved veneer

The ribs come with a real wood veneer improved with a synthetic resin and an outer PVDF film. This unique surface treatment protects the veneer against moisture, the accumulation organic growth and dirt from air pollutions. A maintenance-free surface.

Acoustic Felt

The sturdy 9 mm thick Acoustex felt is made from minimum 50% post-consumer recycled PET bottles and is Oeko-Tex certified. Available in three colours; Wool Grey, Dark Gray and Anthracite.

Felt colours >>

Spa approved core

The core of each rib is a high-density composite that effectively resists moisture up to 100% relative humidity and temperatures from -40°C to + 100°C.

Spa approved core

Lamellow Spa Bamboo

01 BAMBOO WOOL GREY FELT +

01 BAMBOO WOOL GREY FELT

Veneer: Bamboo
Felt: Wool Grey

02 BAMBOO DARK GREY FELT +

02 BAMBOO DARK GREY FELT

Veneer: Bamboo
Felt: Dark Grey

03 BAMBOO ANTHRACITE FELT +

03 BAMBOO ANTHRACITE FELT

Veneer: Bamboo
Felt: Anthracite

Lamellow Spa Artisan Oak

01 ARTISAN OAK WOOL GREY FELT +

01 ARTISAN OAK WOOL GREY FELT

Veneer: Artisan Oak
Felt: Wool Grey

02 ARTISAN OAK DARK GREY FELT +

02 ARTISAN OAK DARK GREY FELT

Veneer: Artisan Oak
Felt: Dark Grey

03 ARTISAN OAK ANTHRACITE FELT +

03 ARTISAN OAK ANTHRACITE FELT

Veneer: Artisan Oak
Felt: Anthracite

FELT

Acoustic felt

The ribs are attached to a 9 mm thick Acoustex felt which is made from a minimum of 50% post consumer recycled PET bottles. The felt is Oeko-Tex certified.

The acoustic felt is available in three shades of grey:
Wool Greay
Dark Grey
Anthracite

Depending on the colour of the acoustic felt backing, the overall impression of the veneer and the finished surface will vary. As a result, there are many possible designs and colour combinations.

CORE

Spa Approved

The slats are made of a dark brown high density composite core (27 mm x 10 mm). The core effectively resists moisture up to 100% relative humidity and enables the ribs to withstand large temperature variations from -40° C to + 100 °C.

Ready to install Lamellow Spa panels

MEASUREMENTS

PANEL DIMENSIONS
A: 2400 mm
B: 600 mm
C: 19 mm
m²: 1.44 m²

RIB DIMENSIONS
15 pcs per panel
D: 10 mm
F: 27 mm

SPACING
G: 13 mm, visible felt between the ribs

ACOUSTIC FELT
E: 9 mm

FRAMING PROFILE
F x C: 27 x 19 mm

PATTERN

Each panel consists of 15 pcs of 27 mm wide slats with 13 mm spacing.

Framing profile and vertical splicing

Lamellow Spa framing profiles for perfect edges in corners or as a nice finish on the panel wall. The framing profile can be used on the vertical sides of the panel and at the top of the panel. The framingprofiles give a nice finish to your wall. Used together with splicing felt on the side of the panel that does not have a protruding felt.

01 FRAMING PROFILE +

01 FRAMING PROFILE

The edge profile is made of the same material as the ribs and with matching veneers.

02 EASY TO INSTALL +

02 EASY TO INSTALL

The edge profiles are glued directly to the substrate and sealed with a wet room joint.

For eyes and ears

Absorption class D is achieved when the panel is installed directly in the wall or ceiling.
To achieve absorption class A (extremely absorbent), first line the wall or ceiling with 45 mm studs, 600 mm cc, and place 45 mm thick mineral wool behind the panels.
For a significant effect we recommend covering minimum 25% of the rooms surfaces.

KNOWLEDGE HUB / ACOUSTICS

Acoustic absorption Lamellow Spa

APPLICATION	INSULATION	αw / NCR
Wall/Ceiling	45 mm mineral wool	αw 0,95-A / NRC 0,95
Ceiling Suspended	0 + 200 mm air void	αw 0,90-A / NRC 0,85
Wall/Ceiling	direct installation	αw 0,30-D / NRC 0,55

Installed directly on an existing wall or ceiling

The Lamellow Spa acoustic panels are simple and quick to mount, directly on any existing wall or ceiling. Depending on the total construction of the installation, sound absorption class A or D will be reached.

INSTALLATION INSTRUCTIONS
CEILING T24 DA

Indors Wall & Ceilings

Install, directly on wall or ceiling. Depending on the sub-construction, screw or nail in the felt between the ribs or use glue. Use screws and nails in colours matching the felt.

Outdoor installations

Lamellow Spa can be used under a roof in exterior environments. Depending on the sub-construction, screw or nail in the felt between the ribs or use glue. Use screws and nails in colours matching the felt.

Sound absorbtion A

To achieve absorption class D (absorbent), install directly on the wall or ceiling.
To achieve absorption class A, line the wall with 45 mm bars, 600 mm cc, and place 45 mm thick mineral wool behind the panels.

VERTICAL OR HORIZONTAL

Lamellow Spa panels can be installed both vertically or horizontally.

Cut the acoustic panels to fit your wall or ceiling. Cut the slats with a sharp saw and the acoustic felt with a carpenter knife.