1. For ceiling use, the maximum thickness of Rib is 28mm for CC 50 mm
installations. For thicker dimensions, contact us.

2. Suspend the Capax profiles BASE-C (2) with 600 mm in between.

3. The connection of BASE-C to the ceiling has to be made every 400 mm.

4. Snap the distance Capax 3262 (3) to the BASE-C profile every 1200 mm
and secure the position with a self-drilling screw in the intersections.

5. Optionally install an Acoustex felt with some self-adhesive tape to keep it
in place during the installation.

6. Attach the Capax U-FIX clips (4) flush to the BASE-C profile with demountable clips or permanent screws. This step will also hold the Acoustex
in place permanently.

7. Twist the U-FIX (4) clips 90° into a perpendicular position to the BASE-C

8. Press the Ribs (6) onto the U-FIX clips and if needed carefullt use a squeezing clamp.

9. Optionally install an insulation material on top to fill the air gap behind
the Ribs.

10. Free hanging Rib-ends should not be longer than 200 mm.

X=Suspension points