Zawieszenie sufitowe i profile<\/h4>\n\n\n\n![\"Rysunki](\"https:\/\/gustafs.com\/wp-content\/uploads\/2022\/03\/ceiling-suspension-profiles-1024x818.png\")
<\/figure>\n<\/div>\n\n\n\n\nKraw\u0119dzie i po\u0142\u0105czenia<\/h4>\n\n\n\n![\"Krawędzie](\"https:\/\/gustafs.com\/wp-content\/uploads\/2022\/03\/ceiling-edges-joints-1024x818.png\")
<\/figure>\n<\/div>\n<\/div>\n\n\n\nUkryte i demontowalne<\/h4>\n\n\n\n![\"Montaż](\"https:\/\/gustafs.com\/wp-content\/uploads\/2022\/03\/concealed-demountable-ceiling-1024x818.png\")
<\/figure>\n<\/div>\n\n\n\n\nRozwi\u0105zania specjalne<\/h4>\n\n\n\n![\"Indywidualne](\"https:\/\/gustafs.com\/wp-content\/uploads\/2022\/03\/special-solution-ceiling-1024x818.png\")
<\/figure>\n<\/div>\n<\/div>\n\n \n \n \n \n Niezb\u0119dne informacje przed monta\u017cem<\/h5>\n \n +<\/span>\n <\/div>\n \n Fire<\/h4>\n
Please note that the fire classification for perforated panels only is valid if mineral wool insulation is used behind Gustafs Panels. Thickness 45 mm density, 28 kg\/m3 and have euroclass A1 or A2 classification.<\/p>\n
The construction<\/h4>\n
The construction is torsionally rigid and\u00a0self-bearing, lacking the need to fix onto\u00a0adjacent walls.<\/p>\n
The system offers full panel demountability\u00a0and thereby access to overlying technical\u00a0installations while maintaining its overall\u00a0stability and strength.<\/p>\n
Capax ceiling profile system is aesthetically\u00a0appealing because totally hidden.<\/p>\n
The system is constructed for a panel width\u00a0of 600 mm but even allows for a 50 mm\u00a0variation between 300 and 600 mm.<\/p>\n
Storage, installation and use conditions<\/h4>\n\n\n\n\n\nOnly for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C\u00b0 and 25-60% humidity. The humidity in the under laying construction (concrete) should not be higher than 15%.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n \n \n Installation, step by step<\/h5>\n \n +<\/span>\n <\/div>\n \n 1.<\/strong> Measure and mark the attachment points for nonius hangers. Then install the hangers at the marked points.
\n2.<\/strong> Hang the main runner profiles on the nonius hangers and then connect the profiles to each other.
\n3.<\/strong> Attach the distance profiles crosswise with the main runner profiles. Secure snap lock with selfdrilling.
\n4.<\/strong> Start installing the panels by attaching the panel edge to the capax profile. You can also saw the panels on site if necessary. Be sure to polish the edges of the panel after cutting.
\n5.<\/strong> Install the insulation behind the panels and between the profiles, once a panel is in place.
\n6.<\/strong> Finish the installation by cleaning the panels from dust and dirt<\/p>\n <\/div>\n <\/div>\n <\/div>\n<\/section>\n\nInstalacja dostosowana do potrzeb klienta<\/h3>\n\n
<\/figure>\n<\/div>\n\n\n\nKraw\u0119dzie i po\u0142\u0105czenia<\/h4>\n\n\n\n<\/figure>\n<\/div>\n<\/div>\n\n\n\nUkryte i demontowalne<\/h4>\n\n\n\n<\/figure>\n<\/div>\n\n\n\n\nRozwi\u0105zania specjalne<\/h4>\n\n\n\n<\/figure>\n<\/div>\n<\/div>\n\n \n \n \n \n Niezb\u0119dne informacje przed monta\u017cem<\/h5>\n \n +<\/span>\n <\/div>\n \n Fire<\/h4>\n
Please note that the fire classification for perforated panels only is valid if mineral wool insulation is used behind Gustafs Panels. Thickness 45 mm density, 28 kg\/m3 and have euroclass A1 or A2 classification.<\/p>\n
The construction<\/h4>\n
The construction is torsionally rigid and\u00a0self-bearing, lacking the need to fix onto\u00a0adjacent walls.<\/p>\n
The system offers full panel demountability\u00a0and thereby access to overlying technical\u00a0installations while maintaining its overall\u00a0stability and strength.<\/p>\n
Capax ceiling profile system is aesthetically\u00a0appealing because totally hidden.<\/p>\n
The system is constructed for a panel width\u00a0of 600 mm but even allows for a 50 mm\u00a0variation between 300 and 600 mm.<\/p>\n
Storage, installation and use conditions<\/h4>\n\n\n\n\n\nOnly for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C\u00b0 and 25-60% humidity. The humidity in the under laying construction (concrete) should not be higher than 15%.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n \n \n Installation, step by step<\/h5>\n \n +<\/span>\n <\/div>\n \n 1.<\/strong> Measure and mark the attachment points for nonius hangers. Then install the hangers at the marked points.
\n2.<\/strong> Hang the main runner profiles on the nonius hangers and then connect the profiles to each other.
\n3.<\/strong> Attach the distance profiles crosswise with the main runner profiles. Secure snap lock with selfdrilling.
\n4.<\/strong> Start installing the panels by attaching the panel edge to the capax profile. You can also saw the panels on site if necessary. Be sure to polish the edges of the panel after cutting.
\n5.<\/strong> Install the insulation behind the panels and between the profiles, once a panel is in place.
\n6.<\/strong> Finish the installation by cleaning the panels from dust and dirt<\/p>\n <\/div>\n <\/div>\n <\/div>\n<\/section>\n\nInstalacja dostosowana do potrzeb klienta<\/h3>\n\n
<\/figure>\n<\/div>\n<\/div>\n\nUkryte i demontowalne<\/h4>\n\n\n\n<\/figure>\n<\/div>\n\n\n\n\nRozwi\u0105zania specjalne<\/h4>\n\n\n\n<\/figure>\n<\/div>\n<\/div>\n\n \n \n \n \n Niezb\u0119dne informacje przed monta\u017cem<\/h5>\n \n +<\/span>\n <\/div>\n \n Fire<\/h4>\n
Please note that the fire classification for perforated panels only is valid if mineral wool insulation is used behind Gustafs Panels. Thickness 45 mm density, 28 kg\/m3 and have euroclass A1 or A2 classification.<\/p>\n
The construction<\/h4>\n
The construction is torsionally rigid and\u00a0self-bearing, lacking the need to fix onto\u00a0adjacent walls.<\/p>\n
The system offers full panel demountability\u00a0and thereby access to overlying technical\u00a0installations while maintaining its overall\u00a0stability and strength.<\/p>\n
Capax ceiling profile system is aesthetically\u00a0appealing because totally hidden.<\/p>\n
The system is constructed for a panel width\u00a0of 600 mm but even allows for a 50 mm\u00a0variation between 300 and 600 mm.<\/p>\n
Storage, installation and use conditions<\/h4>\n\n\n\n\n\nOnly for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C\u00b0 and 25-60% humidity. The humidity in the under laying construction (concrete) should not be higher than 15%.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n \n \n Installation, step by step<\/h5>\n \n +<\/span>\n <\/div>\n \n 1.<\/strong> Measure and mark the attachment points for nonius hangers. Then install the hangers at the marked points.
\n2.<\/strong> Hang the main runner profiles on the nonius hangers and then connect the profiles to each other.
\n3.<\/strong> Attach the distance profiles crosswise with the main runner profiles. Secure snap lock with selfdrilling.
\n4.<\/strong> Start installing the panels by attaching the panel edge to the capax profile. You can also saw the panels on site if necessary. Be sure to polish the edges of the panel after cutting.
\n5.<\/strong> Install the insulation behind the panels and between the profiles, once a panel is in place.
\n6.<\/strong> Finish the installation by cleaning the panels from dust and dirt<\/p>\n <\/div>\n <\/div>\n <\/div>\n<\/section>\n\nInstalacja dostosowana do potrzeb klienta<\/h3>\n\n
<\/figure>\n<\/div>\n\n\n\nRozwi\u0105zania specjalne<\/h4>\n\n\n\n<\/figure>\n<\/div>\n<\/div>\n\n \n \n \n \n Niezb\u0119dne informacje przed monta\u017cem<\/h5>\n \n +<\/span>\n <\/div>\n \n Fire<\/h4>\n
Please note that the fire classification for perforated panels only is valid if mineral wool insulation is used behind Gustafs Panels. Thickness 45 mm density, 28 kg\/m3 and have euroclass A1 or A2 classification.<\/p>\n
The construction<\/h4>\n
The construction is torsionally rigid and\u00a0self-bearing, lacking the need to fix onto\u00a0adjacent walls.<\/p>\n
The system offers full panel demountability\u00a0and thereby access to overlying technical\u00a0installations while maintaining its overall\u00a0stability and strength.<\/p>\n
Capax ceiling profile system is aesthetically\u00a0appealing because totally hidden.<\/p>\n
The system is constructed for a panel width\u00a0of 600 mm but even allows for a 50 mm\u00a0variation between 300 and 600 mm.<\/p>\n
Storage, installation and use conditions<\/h4>\n\n\n\n\n\nOnly for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C\u00b0 and 25-60% humidity. The humidity in the under laying construction (concrete) should not be higher than 15%.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n \n \n Installation, step by step<\/h5>\n \n +<\/span>\n <\/div>\n \n 1.<\/strong> Measure and mark the attachment points for nonius hangers. Then install the hangers at the marked points.
\n2.<\/strong> Hang the main runner profiles on the nonius hangers and then connect the profiles to each other.
\n3.<\/strong> Attach the distance profiles crosswise with the main runner profiles. Secure snap lock with selfdrilling.
\n4.<\/strong> Start installing the panels by attaching the panel edge to the capax profile. You can also saw the panels on site if necessary. Be sure to polish the edges of the panel after cutting.
\n5.<\/strong> Install the insulation behind the panels and between the profiles, once a panel is in place.
\n6.<\/strong> Finish the installation by cleaning the panels from dust and dirt<\/p>\n <\/div>\n <\/div>\n <\/div>\n<\/section>\n\nInstalacja dostosowana do potrzeb klienta<\/h3>\n\n
<\/figure>\n<\/div>\n<\/div>\nNiezb\u0119dne informacje przed monta\u017cem<\/h5>\n \n +<\/span>\n <\/div>\n \n Fire<\/h4>\n
Please note that the fire classification for perforated panels only is valid if mineral wool insulation is used behind Gustafs Panels. Thickness 45 mm density, 28 kg\/m3 and have euroclass A1 or A2 classification.<\/p>\n
The construction<\/h4>\n
The construction is torsionally rigid and\u00a0self-bearing, lacking the need to fix onto\u00a0adjacent walls.<\/p>\n
The system offers full panel demountability\u00a0and thereby access to overlying technical\u00a0installations while maintaining its overall\u00a0stability and strength.<\/p>\n
Capax ceiling profile system is aesthetically\u00a0appealing because totally hidden.<\/p>\n
The system is constructed for a panel width\u00a0of 600 mm but even allows for a 50 mm\u00a0variation between 300 and 600 mm.<\/p>\n
Storage, installation and use conditions<\/h4>\n\n\n\n\n\nOnly for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C\u00b0 and 25-60% humidity. The humidity in the under laying construction (concrete) should not be higher than 15%.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n \n \n Installation, step by step<\/h5>\n \n +<\/span>\n <\/div>\n \n 1.<\/strong> Measure and mark the attachment points for nonius hangers. Then install the hangers at the marked points.
\n2.<\/strong> Hang the main runner profiles on the nonius hangers and then connect the profiles to each other.
\n3.<\/strong> Attach the distance profiles crosswise with the main runner profiles. Secure snap lock with selfdrilling.
\n4.<\/strong> Start installing the panels by attaching the panel edge to the capax profile. You can also saw the panels on site if necessary. Be sure to polish the edges of the panel after cutting.
\n5.<\/strong> Install the insulation behind the panels and between the profiles, once a panel is in place.
\n6.<\/strong> Finish the installation by cleaning the panels from dust and dirt<\/p>\n <\/div>\n <\/div>\n <\/div>\n<\/section>\n\nInstalacja dostosowana do potrzeb klienta<\/h3>\n\n
Fire<\/h4>\n
Please note that the fire classification for perforated panels only is valid if mineral wool insulation is used behind Gustafs Panels. Thickness 45 mm density, 28 kg\/m3 and have euroclass A1 or A2 classification.<\/p>\n
The construction<\/h4>\n
The construction is torsionally rigid and\u00a0self-bearing, lacking the need to fix onto\u00a0adjacent walls.<\/p>\n
The system offers full panel demountability\u00a0and thereby access to overlying technical\u00a0installations while maintaining its overall\u00a0stability and strength.<\/p>\n
Capax ceiling profile system is aesthetically\u00a0appealing because totally hidden.<\/p>\n
The system is constructed for a panel width\u00a0of 600 mm but even allows for a 50 mm\u00a0variation between 300 and 600 mm.<\/p>\n
Storage, installation and use conditions<\/h4>\n\n\n\n\n\nOnly for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C\u00b0 and 25-60% humidity. The humidity in the under laying construction (concrete) should not be higher than 15%.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n \n \n Installation, step by step<\/h5>\n \n +<\/span>\n <\/div>\n \n 1.<\/strong> Measure and mark the attachment points for nonius hangers. Then install the hangers at the marked points.
\n2.<\/strong> Hang the main runner profiles on the nonius hangers and then connect the profiles to each other.
\n3.<\/strong> Attach the distance profiles crosswise with the main runner profiles. Secure snap lock with selfdrilling.
\n4.<\/strong> Start installing the panels by attaching the panel edge to the capax profile. You can also saw the panels on site if necessary. Be sure to polish the edges of the panel after cutting.
\n5.<\/strong> Install the insulation behind the panels and between the profiles, once a panel is in place.
\n6.<\/strong> Finish the installation by cleaning the panels from dust and dirt<\/p>\n <\/div>\n <\/div>\n <\/div>\n<\/section>\n\nInstalacja dostosowana do potrzeb klienta<\/h3>\n\n
Only for indoor use and not in wet rooms. Storage, Installation and Use at 18-50 C\u00b0 and 25-60% humidity. The humidity in the under laying construction (concrete) should not be higher than 15%.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n <\/div>\n <\/div>\n
Installation, step by step<\/h5>\n \n +<\/span>\n <\/div>\n \n 1.<\/strong> Measure and mark the attachment points for nonius hangers. Then install the hangers at the marked points.
\n2.<\/strong> Hang the main runner profiles on the nonius hangers and then connect the profiles to each other.
\n3.<\/strong> Attach the distance profiles crosswise with the main runner profiles. Secure snap lock with selfdrilling.
\n4.<\/strong> Start installing the panels by attaching the panel edge to the capax profile. You can also saw the panels on site if necessary. Be sure to polish the edges of the panel after cutting.
\n5.<\/strong> Install the insulation behind the panels and between the profiles, once a panel is in place.
\n6.<\/strong> Finish the installation by cleaning the panels from dust and dirt<\/p>\n <\/div>\n <\/div>\n <\/div>\n<\/section>\n\nInstalacja dostosowana do potrzeb klienta<\/h3>\n\n
1.<\/strong> Measure and mark the attachment points for nonius hangers. Then install the hangers at the marked points.
\n2.<\/strong> Hang the main runner profiles on the nonius hangers and then connect the profiles to each other.
\n3.<\/strong> Attach the distance profiles crosswise with the main runner profiles. Secure snap lock with selfdrilling.
\n4.<\/strong> Start installing the panels by attaching the panel edge to the capax profile. You can also saw the panels on site if necessary. Be sure to polish the edges of the panel after cutting.
\n5.<\/strong> Install the insulation behind the panels and between the profiles, once a panel is in place.
\n6.<\/strong> Finish the installation by cleaning the panels from dust and dirt<\/p>\n <\/div>\n <\/div>\n <\/div>\n<\/section>\n\nInstalacja dostosowana do potrzeb klienta<\/h3>\n\n